FREQUENCY CONTROL SYSTEM: Effective from the 1 September 2006.
These are the frequencies that must be used for the control of model aircraft at any NZMAA approved site and are recommended to be used at all times whilst flying RC Aircraft.
Those marked with an ‘*' are frequencies allocated for use of model aircraft only.
Those channels marked with an ‘!!' are to be used with caution. They should not be used in areas near (say 15km) where cranes or logging operations are taking place and are not recommended for purchase.
Note! Channel #'s from 72.810 to 72.990 have been withdrawn by the Radio Frequency Service and may not be used.
| Mhz | Ch# | Mhz | Ch# | Mhz | Ch# | Mhz | Ch# | Mhz | Ch# | Mhz | Ch# |
|---|---|---|---|---|---|---|---|---|---|---|---|
26.975
26.995 |
197
199 |
35.000 35.010 35.020 35.030 35.040 35.050 35.060 35.070 35.080 35.090 35.100 35.110 35.120 35.130 35.140 35.150 35.160 35.170 35.180 35.190 35.200 35.210 35.220 35.230 35.240 35.250 35.260 35.270 35.280 35.290 35.300 |
500*
501* |
36.250 36.270 36.290 36.310 36.330 36.350 36.370 36.390 36.410 36.430 36.450 36.470 36.490 36.510 36.530 36.550 36.570 36.590 |
625
627 |
40.510 40.530 |
451*
453* |
72.010
72.030 |
701
703 |
72.510
72.530 DO 72.810
72.830 |
751!!
753!! DO NOT USE 781
783
|